Circumferential Cervical Spinal Fusion

Published on 13/03/2015 by admin

Filed under Neurosurgery

Last modified 13/03/2015

Print this page

rate 1 star rate 2 star rate 3 star rate 4 star rate 5 star
Your rating: none, Average: 0 (0 votes)

This article have been viewed 2416 times

Chapter 158 Circumferential Cervical Spinal Fusion

Recent advances in complex spinal surgery have helped foster the increased number of cervical spine procedures that are using a bidirectional approach. This is done for decompression of the neural elements, biomechanical stresses, and to influence the fusion ability of the patient. Although the ability of most surgeons allows them to use this technique to achieve surgical goals, it is also not without potential drawbacks. These issues can include surgical time, morbidity to the patient, and substantial increased cost. The purpose of this chapter is to provide details of patients who may benefit from a circumferential approach, followed by discussion of proper technique and complication awareness/avoidance, and a review of the outcomes.

The Rationale for Circumferential Surgery

It is perhaps useful to first review the goals of surgery on the cervical spine, so as to best put each item in proper context and how it may influence the choice to consider circumferential surgery for a given patient. These include decompression of the neural elements, restoration of spinal alignment, spinal stability, proper environment for fusion, and the health of the patient.

Certainly one of the most obvious reasons for choosing bidirectional surgery of the cervical spine would be that the patient presents with obvious compression of both the ventral and dorsal surfaces of the spinal cord (Fig. 158-1). If the patient is not overly frail, then one can make a rationale for this approach. There is some degree of inherent common sense to directly remove the compressive structure of the spinal cord. One variation might be surgery to treat ossification of the posterior longitudinal ligament (OPLL).14 Patients with dramatic anterior compression are commonly treated by posterior decompression in order to avoid the significant pitfalls of anterior surgery.

Restoration of spinal alignment has received an increasing degree of attention recently as a potential crucial factor in the outcome of patients with cervical spondylitic myelopathy (CSM).58 Most would agree that circumferential surgery is indicated for patients that present in frank kyphosis (Fig. 158-2). This may result from numerous factors including posterior migration of the cord, vascular perfusion, and longitudinal stresses on the cord. If a patient is left in a kyphotic position, then draping and potential anterior compression of the spinal cord are certainly possible. The classic example of this would be postlaminectomy kyphosis. Nottmeier et al. recently published results of cervical kyphotic deformity correction using a anterior-posterior reconstruction. Their patient population had a mean preoperative kyphosis of 18 degrees. They were able to achieve a mean correction of sagittal angle of 22 degrees. This resulted in a mean postoperative sagittal angle of 4 degrees. There was no reported loss of deformity correction during the follow-up period and they reported a fusion rate of 97.5%.8

Several studies have looked at the potential importance of postoperative posterior spinal cord migration. There is a concern that residual kyphosis may allow the spinal cord to be draped across the vertebral column, which may contribute to compromise of the spinal cord via vascular compromise or longitudinal stress. Lee et al. attempted to quantitatively assess preoperative factors that would predict this postoperative movement of the cord. Besides the commonly stated importance of preoperative sagittal balance, they also found significance in the relative degree of stenosis directly above the “laminectomized” level to be particularly important.9 However, the clinical importance of cord shift remains uncertain. Hatta et al. found no clinical correlation in myelopathy outcomes to cord migration.10

There has also been some attention given to the potential effects of “longitudinal stress” to the spinal cord by Uchida et al. It is interesting to consider the potential similarities of this to the physiologic derangement that has been documented to occur with tethering of the spinal cord.11,12

History

Bidirectional surgery for the cervical spine was originally reserved for cases of clear violation of stability of both the anterior and posterior elements of the cervical spine. Most cases dealt with either trauma or neoplastic disease. Instrumentation of the spine was limited to wiring techniques (Figs. 158-3, 158-4, and 158-5). Cases frequently required staging, and patients commonly required prolonged immobilization.

The evolution of surgical hardware has taken us from stainless steel wiring techniques to lateral mass plates and to polyaxially screw and rod fixation (Figs. 158-6 and 158-7). This has made single-stage anterior-posterior reconstructive procedures more feasible and reasonable in a larger number of patients.13

The surgical training for treatment of complex spinal disorders has also rapidly expanded. As a result, anterior decompression involving segmental reconstructions and corpectomies has become increasingly routine for spinal surgeons.

Technique

Many variations can occur regarding the strategy on planning these cases. Typically, the authors prefer to initiate the approach from the anterior direction first. However, this can be influenced by such things as the need to remove posterior instrumentation. This description will be focused on the typical case of cervical degenerative disease requiring a circumferential decompression.

Imaging

Patients should be evaluated with preoperative plain x-rays in addition to the expected magnetic resonance imaging (MRI) and or computed tomography (CT) myelogram. Abnormal signal on MRI images may also offer some prognostic information regarding potential patient recovery. Mastronardi et al. studied patients with spondylotic myelopathy and found that T2 signal changes are potentially reversible with decompression. T1-weighted signal changes were associated with the worst prognosis and were thought to represent irreversible damage to the cord (Figs. 158-3 and 158-8). Patients with myelopathy that had no signal abnormalities on their preoperative MRI were found to have the best prognosis.14 This is an interesting concept to include in the debate of whether patients with cervical cord compression should be considered for early treatment or for a conservative approach during follow-up.

Flexion/extension studies can also be helpful to show the overall degree of sagittal balance, as well as to determine whether a kyphotic deformity is mobile or fixed. Great importance should be given to the cervicothoracic junction if one is considering termination of the construct at C7. It is not infrequently observed that patients may not have significant stenosis at C7–T1, but may have an anterolisthesis. If this is the case, then the construct should extend past the cervicothoracic junction.

Any consideration to instrument the C2 vertebrae should be complemented with a CT including sagittal reconstructions to assess the location of the vertebral artery and its potential risk for injury. If the artery is contained within the pars intra-articularis, then one may want to consider avoiding C2 pars or pedicle screws. A newer option may be to place C2 translaminar screws. This is now much more feasible since the latest generation of polyaxial screw systems have a very wide screw head range of motion.